Initio I/O HIGHWAY Bedienungsanleitung

initio®iUsers Manualinitio®TM

6initio®I/OHIGHWAYs SCSI termination can be set to auto-termination or programmable modevia the SmartSCSI Setup Utility. This feature allows the oper

7initio®Installation BasicsThe internal cable permits connection of multiple internal devices. SCSI devices that areconnected to the internal connecto

8initio®3 Inserting the host adapterOrient the host adapter for installation so that the external connector is facing theback of the system unit and a

9initio®Hardware InstallationWhen attaching FastSCSI devices, use the 50-pin FastSCSI cable connector on thehost adapter. Align the internal cable in

10initio®5 Drive activity LEDA drive activity LED is designed into the host adapter to indicate when a datatransfer is being made. Connection to the

11initio®9 System startupThe newly installed SCSI bus is now ready to power up. Switch on peripheral andhost computer system power. The system monitor

12initio®

13initio®Running the SmartSCSI Setup UtilityTo start the SmartSCSI Setup Utility, verify that all devices attached to the SCSI bus arepowered up when

14initio®Host Adapter SetupDOS Space > 1 GB. Using this option allows for single disk capacities to be extendedup to 8 GBytes (yes). Please refer

15initio®SCSI Parity Check ON. Select this option to enable or disable parity checking on theSCSI bus by the host adapter. The default setting for th

initio®iiInitio Corporation  2188-B Del Franco Street  San Jose, California  95131-1575http://www.initio.comCopyrightCopyright©1998 Initio Corporat

16initio®

17initio®MS-DOS/Windows 3.1x Driver InstallationOverviewThe Initio ASPI driver will support extended SCSI command functions for MS-DOS 3.30or later.

18initio®MS-DOS/Windows 3.1x Driver InstallationInstalling the Initio ASPI drivers to an existing Windows3.1x systemThe ASPI for Windows 3.1x drivers

19initio®MS-DOS/Windows 3.1x Driver InstallationASPI Manager Command Line OptionsBelow is a list of command line options. The Initio ASPI Manager, AS

20initio®MS-DOS/Windows 3.1x Driver Installationare 1-9 and D or d. The D or d values are used to Disable the time out mechanism. Ifthe time out mec

21initio®ASPI Disk Driver Command Line OptionsINIDISK.SYS is a DOS block device driver for supporting SCSI fixed disks, removabledisks and MO devices.

22initio®/X0 This will exclude ALL drives on Host Adapter 0.SAMPLE CONFIG.SYSThese samples assume that the user has loaded the Initio drivers in the f

23initio®OverviewI/OHIGHWAY will support Microsoft Windows 95 and Windows 95B (OSR2) with theaddition of a software driver. The installation procedur

24initio®1 Access the Windows 95 CD-ROM from either the DOS prompt or from MicrosoftWindows 3.x File Manager. Execute the SETUP.EXE program and follo

25initio®Adding the Initio Driver to an Existing Windows 95/95aSystemThese instructions will guide you through the installation of the Initio host ada

initio®iiiTechnical Support ii1. INTRODUCTION 1The Initio I/OHIGHWAY PCI-FastSCSI host adapter 1Technical Illustration 2Product Fe

26initio®Updating the Initio Windows 95/95a Device Driver1 Once a Windows 95 session is established, use your installed mouse or the appropri-ate key

27initio®New Windows 95B (OSR2) InstallationThese instructions will guide you through the installation of the Initio host adapter driverwhile installi

28initio®4 It is highly recommended that you verify Initios Windows 95 device driver by selectingMY COMPUTER from the desktop. Then select CONTROL P

29initio®Updating the Initio Windows 95B (OSR2) Device Driver1 Once a Windows 95 session is established, select MY COMPUTER from your desktop.Execute

30initio®

31initio®OverviewI/OHIGHWAY will support Windows NT v3.5x/4.0 with the addition of a software driver. Asoftware driver allows the host computer the ab

32initio®2 If you are installing Windows NT from a CD version, locate the Windows NTSetup Disk for CD-ROM Installation. Make a backup copy of this di

33initio®3 In the INSTALL DRIVER window, select HAVE DISK....4 In the INSTALL FROM DISK window that is displayed, enter the Initio Driver pathname:

34initio®2 When SETUP begins to load, the screen will turn from black to blue with the textSETUP IS INSPECTING YOUR COMPUTERS HARDWARE CONFIGURATION

35initio®OverviewI/OHIGHWAY will support Novell NetWare 386 V4.XX or V3.1X with the addition of asoftware driver. The installation procedure describe

initio®iv7. MICROSOFT WINDOWS NT DRIVER INSTALLATION 31Overview 31Installation 31New Windows NT installation 31Adding or updating

36initio®6 Select installation type. <ENTER>7 Enter server name when prompted <ENTER>At this point the boot files will be copied to the ha

37initio®Upgrading/Changing Driver on an Existing IntraNetWareServer1 To begin the you will need to change the directory to the location of the server

38initio®Device driver command line optionsThe Initio device drivers support command line switches to optimize driver performance.However, in certain

39initio®OverviewThe I/OHIGHWAY OS/2 driver will support OS/2, 3.0 & 4.0. The device driver for OS/2 iscopied from the INI-9XXXU/9XXXUW DRIVER DIS

40initio®3 Using an appropriate text editor modify the CONFIG.SYS on the OS/2 Diskette 1 forINI-9XXX to include the new Initio driver.Enter: BASEDEV

41initio®Device driver command line optionsThe Initio device drivers support command line switches to optimize driver performance.Device drivers norma

42initio®

43initio®OverviewThe I/OHIGHWAY SCO UNIX device driver will support SCO UNIX System V/386 Release3.2v4.0 or later, SCO Open Desktop v2.0, v3.0 or late

44initio®Installing the Initio driver in a new SCO UNIX system1 Insert the SCO UNIX N1 boot disk into the floppy drive and turn on the system. At t

45initio®Changing to the INI-9XXX as the bootable host adapter:1 Insert the INI-9XXXU/9XXXUW DRIVER DISK 2 diskette into floppy drive.2 Type: insta

1initio®IntroductionThe Initio I/OHIGHWAYis a high-performancePCI bus master FastSCSI host adapter whichprovides the interface between the FastSCSIbu

46initio®

47initio®OverviewThe I/OHIGHWAY SCO UnixWare device driver will support UnixWare 2.x. The device driveris transferred from the floppy diskette to the

48initio®2 When prompted to INSTALL HOST BUS ADAPTER DRIVERS, insert the INI-9XXXU/9XXXUW DRIVER DISK 2 into drive A: press <Enter>.3 When p

49initio®4 If the host adapter is NOT intended to be bootable, these instructions will guide youthrough changing the current software settings for U

50initio®SCO UnixWare Driver Installation2 Then rebuild the UnixWare kernel by executing the following commands at the system prompt:/etc/conf/bin/id

51initio®In the following section you will find commonly asked questions and answers to problemsencountered during the installation of your host adapt

52initio®TroubleshootingConsult the SCO UnixWare Installation Handbook Troubleshooting section to helpisolate the problem. If it becomes necessary

53initio®TroubleshootingDrives with Multiple Operating SystemsIt is mandatory that the same head mapping be used across multiple operating systemson o

54initio®

55initio®AASPI 15, 16ASPI CD-ROM Driver 17ASPI Disk Driver Command LineOptions 19ASPI Manager 17ASPI910U 17Autoexec.bat 18BBIOS 15bus 16CCD-RO

2initio®This illustration identifies major components pertaining to your I/OHIGHWAY hostadapter. You will find it helpful to refer to this illustrati

56initio®OOEMSETUP.INF 29OS/2 driver 37OSR2 21, 25, 26PPCI SCSI BUS CONTROLLERS 23PCI-SCSI Bus Controller 22PROGRAM MANAGER 16RREADME.TXT 16SSC

57initio®Initio Corporation warrants to the original purchaser that this product shall be free from defects inmaterial and workmanship for a period of

58initio®The user is cautioned that any changes or modifications not expressly approved by the party responsible forcompliance could void the users a

3initio®Product Features PCI Compatibility: The PCI Bus is a 32-bit bus with multiplexed address and datalines. I/OHIGHWAY is compliant with PCI 2.1

4initio®Product Features/Specifications Command Queuing: A unique implementation to provide 255 simultaneous SCSIcommands. SCSI compliant: I/OHIGHWA

5initio®Getting StartedHost Adapter and the SCSI BusI/OHIGHWAY is a bus mastering host adapter which works with the host computer toprovide control fo